IP Router - CB IPR
Order no. 3622-141-17
Dimensions (L x W x H) 90 / 36 / 58 mm
The ComBridge IP Router (CB IPR) connects bus lines or bus areas with the IP network. It uses the standardized KNX protocol KNXnet/IP. The device can be used as a line, area or network coupler to enable the communication between KNX devices and PCs. The CB IPR web server provides selected system information.
Connection mode:
5xTunnel/1xObject Server
Product information
Programming interface
KNX installations can be accessed remotely via connection with a LAN-modem or DSL Router. CB IPR supports 5 tunnel connections which can be used, for example, as ETS programming connections. Network parameters such as multicast address, IP address, subnet mask and standard gateway are programmed with the ETS. Additional parameters define the rules for KNX group address filtering.
Visualisation interface
CB IPR also offers an object server connection which can be used for visualisation systems. Both connection types – tunnel and object server connection – can be used in parallel.
Web information
If you load the URL of the router in a standard browser, the CB IPR web pages display information about the bus load and the number of bus telegrams that have been transmitted from KNX to IP and vice versa. Connected and unconnected, tunnels and object server connections as well as the corresponding connection details are also displayed. Password-protected websites offer the possibility to cancel connections and prevention of unauthorized connections to the KNX system.
Installation
Pluggable terminal blocks to connect to the external voltage source AC/DC 24 V, bus connection via bus terminal, Ethernet connection via RJ45 plug, 2 DU DIN rail device.
Newsletter Registration
Informed at all times.
Register now
Questions or comments?
Contact us!
Contact form