|
|
Transponder-Card Reader
 Model versions
|
At the front side of the card reader the following components can be found:
- Surface in Aluminium, anodized
- Cover in aluminium, anodized
- 1,2 or 3 pusbuttons for variable functions
- Up to 3 indicating LED's
At the back side of the card reader the following components can be found:
- KNX Bus Connector
- Binary Input
- Binary Output 12-24 VAC/VDC
- Prog. -> Programming Button
- LED -> Programming LED
|
| Display Elements: |
Up to 3 indicating LED's on the frontside
LED red indicating normal / addressing mode
|
| User Elements: |
Up to 2 pusbuttons operation from KNX-Functions
Programming switch to toggle between normal and addressing mode |
| Connectors: |
Busline: KNX bus connector
Binary Input
Binary Output: 12-24 VAC/VDC |
| Dimensions: |
Wide: 156mm, High: 190mm, Depth: 52 mm |
| Weight: |
350 g |
| Environmental Data: |
Operation: -5°C to +45°C
Storing: -20°C to +70°C |
| Relative Humidity: |
non condensing: 5 % to 93 % |
| Bus Coupler: |
integrated to the device, connector with standard KNX
bus connector |
| Power Supply: |
via KNX Bus |
| Protection Type: |
IP20 according to EN 60529, Din VDE 0470 |
| Protection Degree: |
I according to IEC 1140 |
| Pollution Degree: |
2 |
| Surge Category: |
III |
|
|
| ©1996-2011 IPAS GmbH Duisburg |
|
|
Model versions
