|
Design Panels of this series have a visible width from 37mm. The lenght of the push button field is 178mm. The push buttons are attachable with various KNX functions.
Alternativley the customer can choose between variants of 1 or 2 push button pairs.
All Panels are available in Aluminium or in Stainless Steel. The colouring can be chosen among a number of anodisation colours so as to match the architectural environment.
The anodisation process actually encloses the pigments inside the aluminium, which makes the material resistant to fingerprints and wear.
In stainless steel, the material can be glass impacted, polished or brushed.
As with all IPAS design panels, the surface only adds 2mm to the wall, without any visible fixing elements such as screws, etc. IPAS design panels can therefore be integrated into a variety of situations: wall flush mounting, dry walls, separation walls and enclosures, panels, furniture, trunking systems.
The special design of this panels can therefore be integrated in verticale or horizontale position.
The IPAS Panels offer intuitive use of the different room functions in an homogenous design - all panels can be labelled according to customer specification with pushbutton symbols and text on the panel surface.
With all modelvariants the functions are adjustable via parameter. Trailing functions are realisable:
 Switching
Dimming (2 buttons)
Scene Recall
Shutters / Louvers
Light Scene Recall
The pusbuttons need to be pressed down by 0,3mm only in order to activate the associated function. The button when depressed gives a pleasant tactile feedback.
The aluminium version allows a choice between flat and slightly raised buttons (0,5mm).
|
