Deutsche Seite
Print View
 
 

Touch Displays

ETS TouchControl Displays are multifunctional touch screen devices for displaying all the important standard functions and status informations of the KNX system. All the important standard functions and the status display of the KNX system can be accessed and displayed with the TouchControl ETS devices.

One of the main characteristics of the TouchControl ETS devices is the fact that it is programmed exclusively with ETS software. Therefore only KNX knowledge is required.

TouchControl ETS6M
The touch control ETS6M provides the user with up to 70 KNX functions clearly arranged as a sheet available. The graphic display with 320 x 240 pixels and the backlight is the basis for a resistive touch matrix with 6 x 10 touch-sensitive fields.

All major standard functions and status indicators of the installed KNX system with the ETS6M are accessed and displayed.

The touch control ETS6M is designed for continuous operation and is characterized by very low power consumption.

The aluminum frame is available on request in different anodized colors.

 TouchControl ETS6C
110 functions to up to 60 user pages on a 5.7" TFT Color Touch Screen are enough to operate also complex automation projects. Symbols indicate the most common conditions, actions and give feedback.

At the touch ETS6C up to 64 easy to configure, set scenes. The scenes are placed directly on the screen together. In addition, the unit has a day switching plan, a logic module, alarm functions and a built-in slide show.

With just 75mm deep the device is well to blend into the support, flush mounted in panels or walls.

Screens are available in different shades of high-quality toned glass as well in aluminium and stainless steel. If required, the aluminium can be anodised in various colourings.

©1996-2011 IPAS GmbH Duisburg