|
The ComBridge Net Communication Interface (NCI) is a interface to connect a KNX installation witha TCP/IP-network. The device supports two connection types:
The KNXnet/IP tunnelling connection is used in connection with the ETS3 to program KNX devices via the TCP/IP network. By using the Scan function in the ETS, KNXnet/IP devices can be easily found and installed on the network.
Afterwards KNX devices can be programmed via the KNXnet/IP Protocol. With thecorrect network settings, the programming of KNX devices is also possible via the Internet.
The KNXnet/IP object server connection makes an active KNXnet/IP tunneling connection and the visualisation of a KNX installation possible at the same time.
In connection with the visualisation software ComBridge Studio Suite, a range of tasks can be performed and a web-based status display is possible.
The NCI is primarily a KNXnet/IP interface to program KNX devices. Together with the ETS3, advantages such as for example the Wireless LAN connection in a TCP network, can be used to perform programming tasks easily.
Thereby the NCI also enables the programming of KNX devices via the Internet.
The ComBridge NCI is the most cost-effective interface for programming and visualisation tasks.
| 
