|
The ComBridge Multi Media Gateway (MMG) connects media devices with the KNX bus. It thereby enables the control of media devices.
A number of media devices such as beamers or multi-room systems for the independent acoustic irradiation of different zones, often have a serial control entry, through which
manufacturer-specific commands can be sent or read. Hence, certain functions such as beamer On/Off, volume control or selection of certain media sources may be performed.
The MMG translates classic KNX objects into the corresponding manufacturer-specific commands.The manufacturer of the media device (ETS Application) is chosen in the ETS and the
desired KNX group addresses are connected with the media objects and programmed.
At present ETS applications are available for the following devices:
 Epson: EMP-S4, EMP-S5, EMP-X3, EMP-X5, EMP-82, EMP-83, EMP-17000, EMP-1705, EMP-1710, EMP-1815, EMP-1825, EMP-750, EMP-760,
EMP-7900, EB-G5100, EB-G5150, EB-G5200, EB-G5300, EB-G5350, EMP-6110 und weitere
3M: X64, X65, MP8790, MP8795
Mitsubishi: XD2000U, XD1000U, XD490U, XD 460U
BenQ: PB8220, PB8230
InFocus LP540, LP640
Phillips: PXG10
Toshiba: TLP790
Hitachi: CPX807, CPX885
Anymore following multiroom-audio equipment are accessible:
QED: Systemline 4.4
Russound: CAM6.6 and CAS44
Tutondo: MR 9005
Xantech: MRC88
|
|
|
