| Display Elements: |
Red LED to indicate KNX Normal-/Addressing Mode
Green PWR-LED to signal device readiness (blinks when in normal
operation mode)
Red ERR-LED to signal fault status
LC-Display, 2 lines with 12 characters each with menu for commissioning
and setting of parameters
|
| User Elements: |
Programming Button to toggle between normal
and addressing mode
3 buttons (SCROLL, Prg/Set, ESC) on display front to commission the
device and set parameters |
| Connectors: |
KNX bus connector
RJ45 Connector for Ethernet
|
| Bus Coupler: |
integrated in device, connection with standard bus connector |
| Dimensions: |
35mm DIN rail mounting 4 units wide:
Width: 70mm
Hight: 55mm
Lenght: 86mm |
| Weight: |
160 g |
| Casing: |
LEXAN UL-94-V0 |
| Environmental Conditions: |
EN 50090-2-2 |
| |
Operation: 0°C to +45°C
Storage: -25°C to +70°C |
| Rel. Humidity: |
non condensing: 5 % to 93 % |
| Power Supply: |
External or KNX Bus, SELV 24 VDC
|
| Protection type: |
IP20 according to EN 60529, Din VDE 0470 |
| Class: |
I according to IEC 1140 |
| Pollution Class: |
2 |
| Overvoltage Category: |
III |
| EMC: |
complies with EN 50081-1, EN 50082-2, EN
50090-2-2 |
| CE-Signage |
According to EMC-Guidelines (Residential
and commercial buildings), Low Voltage guidelines |
| Certification |
EIB/KNX registered |
